Piston seal
Description
MPP is a complete stamp "monoblock" made of NBR rubber is vulcanized on a metal core.
MPP is normally used in pneumatic applications with both single and double acting cylinders.
This profile with rounded lips ensure an improved gliding and reduce the stick slip effect significantly.
The track in the center conductor grease out of the sealing lips and letting them longer life.
General Data
Material
NBR 70 Shore A.
Alternatively, this seal is provided in the FKM.
Technical data
Press <20bar
Speed: <1.0 m / s
Temperature: -30 ° C to + 100 ° C
Mounting
It is important that there are no burrs or other sharp edges which might damage the seal during installation.
It is recommended that the piston is lubricated before mounting.
| D | d | H | H1 | H2 | D1 | C |
|---|---|---|---|---|---|---|
| 25,0 | 8,0 | 12,0 | 6,0 | 4,0 | 14,50 | 3,00 |
| 32,0 | 8,0 | 15,0 | 6,0 | 4,0 | 16,00 | 3,00 |
| 40,0 | 10,0 | 18,0 | 7,0 | 5,0 | 23,00 | 3,00 |
| 50,0 | 10,0 | 18,0 | 7,0 | 5,0 | 29,00 | 4,00 |
| 60,0 | 12,0 | 22,0 | 9,0 | 6,0 | 37,50 | 4,00 |
| 63,0 | 12,0 | 22,0 | 9,0 | 6,0 | 40,50 | 4,00 |
| 63,0 | 14,0 | 22,0 | 9,0 | 6,0 | 40,50 | 4,00 |
| 63,0 | 16,0 | 22,0 | 9,0 | 6,0 | 40,50 | 4,00 |
| 70,0 | 12,0 | 22,0 | 9,0 | 6,0 | 47,00 | 4,00 |
| 75,0 | 12,0 | 25,0 | 9,0 | 6,0 | 49,00 | 4,50 |
| 80,0 | 12,0 | 25,0 | 9,0 | 6,0 | 55,00 | 4,50 |
| 80,0 | 14.0 | 25,0 | 9,0 | 6,0 | 55,00 | 4,50 |
| 80,0 | 16,0 | 25,0 | 9,0 | 6,0 | 55,00 | 4,50 |
| 80,0 | 18,0 | 25,0 | 9,0 | 6,0 | 60,00 | 4,50 |
| 90,0 | 12,0 | 25,0 | 10,0 | 7,0 | 65,00 | 4,50 |
| 100,0 | 18,0 | 25,0 | 12,0 | 9,0 | 75,00 | 4,50 |
| 100,0 | 20,0 | 25,0 | 12,0 | 9,0 | 75,00 | 4,50 |
| 125,0 | 18,0 | 30,0 | 12,0 | 9,0 | 90,00 | 5,00 |
| 125,0 | 30,0 | 30,0 | 12,0 | 9,0 | 90,00 | 5,00 |
| 160,0 | 24,0 | 30,0 | 14,0 | 11,0 | 115,00 | 6,00 |
| 200,0 | 24,0 | 30,0 | 14,0 | 11,0 | 150,00 | 6,00 |